24/7 Race Fuel and Methanol one-stop-shop

Singapore's only 24/7 Race Fuel and Methanol one-stop-shop now open!! Car enthusiasts will be able to walk in, purchase and collect VP Racing Fuels as well as BestChem Methanol (for water/meth injection) at 60 Senoko Road, Singapore 758124.

 

 

 

VP Racing C16 

Used in turbocharged engines, blown engines and nitrous applications with CRs up to 17:1. Recommended by the top nitrous oxide companies. Spec Fuel for NHRA Comp Eliminator.

  • Leaded
  • Color: Blue
  • Motor Octane: 117
  • Research Octane: 120+
  • Oxygenated: No
  • Specific gravity: 0.735 at 60° F

Packing: 19 Litres Drum

Price: S$ 340.00 

 

VP Import

 

Maximum power and torque in small displacement, high RPM, all motor, turbocharged or nitrous sport compact applications. Makes 5% more power than C16 and similar no oxygenated fuels. Works well under high temperatures due to mechanical heat.

  • Leaded
  • Color: Clear
  • Motor Octane: 120+
  • Oxygenated: Yes
  • Specific Gravity: 0.744 at 60° F

 Packing: 19 Litres Drum

 Price: S$ 450.00

 

VP Racing Motorsport 109 (MS109)

 

Produces more power than any other unleaded fuel. Recommended for higher boost applications with CRs up to 11:1 or naturally aspirated engines up to 13:1.

  • Unleaded
  • Color: Clear
  • Motor Octane: 101
  • R+M/2: 105
  • Research Octane: 109
  • Oxygenated: Yes
  • Specific Gravity: 0.722 at 60° F

Packing: 19 Litres Drum

Price: S$ 290.00

 

VP Racing HP100

 

High octane unleaded performance fuel for on-track and off-road competition as well as time trials.

  • Unleaded
  • Color: Orange
  • MON: 96
  • RON:104
  • R+M/2: 100
  • Specific Gravity: 0.712

Packing: 19 Litres Drum

Price: S$ 185.00

 

VP Racing C5 Octane Booster

 

Raises octane up to 8 numbers for increased performance while providing lead lubrication. Contains MMT, the only effective octane booster other than TEL.

Increased fuel octane helps to eliminate pre-ignition and detonation.This produces more horsepower and torque while permitting your engine to run cooler and to its full potential. Perfect for modified streetcars and occasional track day racers needing an edge over the competition or an added safety margin for engine life when running commercially available pump fuel. 

Directions: For Maximum results, add one full can (0.946liters) of C5 octane booster to every 40-60 litres of premium unleaded fuel. Add prior to fuelling to ensure a thorough mixture. Do not use with catalytic converters.

Packing: 946ml Can

Price: S$ 50.00 

 

VP Madditive Cetanium

 

Cetane Concentrate
An explosion of power. Increase cetane for off-road racing diesel applications. Cetanium cleans injectors and pumps and will increase your fuel mileage while it replaces lost lubrication.

32oz. treats up to 10 gallons (38 Liters)

  • Increases cetane up to 10 numbers
  • Increases horsepower
  • Cleans injectors and pumps
  • Increases fuel mileage
  • Prevents sludge and deposits
  • Provides protection for Biodiesel applications
  • Reduces smoking
  • Replaces lost lubrication 

Packing: 946ml Can

Price: S$ 53.00

 

VP Madditive Power Boost

 

Combustion Enhancing Additive Power you can feel. Restore the power your engine once had. Cleans fuel system and removes deposits from the combustion chamber. Power Boost gives you a “seat-of-the-pants” jolt that makes driving fun again, while reducing the need for higher-octane gasoline.

16oz. treats up to 18 gallons (68 Liters)

  • Increases horsepower
  • Improves vaporization & enhances combustion
  • Restores lost power
  • Reduces need for higher octane
  • Cleans fuel system, removes deposits from combustion chamber
  • Provides “seat-of-the-pants” power boost
  • Reduces or eliminates knocking and pinging
  • For use in all 4-cycle & 2-cycle gasoline engines

Packing: 473ml Can

Price: S$ 28.00

 

VP Madditives Fuel System Cleaner

 

Clean your entire fuel system for up to 5000 miles. VP’s Fuel System Cleaner increases fuel mileage, restores performance, and virtually eliminates knocks and pings.

The advanced formula reduces harmful emissions in all street and off-road uses. 16 ounces (473ml) treats up to 20 gallons (76 litres). Catalytic converter and O2 sensor friendly. 

Packing: 473ml Can

Price: S$ 28.00

 

VP Madditives Diesel All-In-One Fuel Conditioner

 

Fuel Conditioning Additive – Treat your Diesel right. Get more out of your diesel engine with Diesel All-In-One Fuel Conditioner. All-In-One Fuel Conditioner cleans injectors and pumps, increases cetane, and replaces lost lubrication. Increases fuel mileage and reduce smoking. Protects petroleum based (ULSD) and biodiesel applications and disperses water.

24oz. treats up to 240 gallons (908 Liters)

  • Cleans injectors and pumps
  • Increases cetane and replaces lost lubrication
  • Reduces smoking while increasing fuel mileage
  • Provides Biodiesel protection
  • Disperses water
  • Anti-Gel to -40°F
  • Synthetic fuel catalyst
  • Cleans sludge deposits

Packing: 720ml Can

Price: S$ 30.00

 

VP Madditives Fuel Stabilizer w/ Ethanol Shield

 

Ethanol Protection Additive Stability for the long road ahead. Eliminates the problems caused by ethanol fuel while reducing heat and extending engine life. Fuel Stabilizer with Ethanol Shield protects your engine and prevents repairs.

8oz. treats up to 80 gallons (303 Liters)

  • 3 year fuel stabilizer**
  • Eliminates Ethanol fuel problems
  • Protects and prevents need for repairs
  • Extends engine life
  • Reduces heat
  • For use in all 4-cycle & 2-cycle gasoline engines
  • For use in every tank fill up

Packing: 8oz Can

Price: S$ 50.00

 

Bestchem Methanol (Methyl Alcohol) for Water Injection

Meets military spec: O-M-232-E

A high quality methanol designed to bring out the power in your motor. This product will improve combustion and increase flame speed allowing higher compression, thus increasing RPM, horsepower, and acceleration.

Super-charged and turbo-charged cars could eliminate the need for an intercooler, which makes the install of superchargers and turbochargers much easier. Methanol has a cooling effect like Super-chargers and turbo-chargers, produce higher air intake temperature due to the compressing of air. Methanol will lower the air intake temperature dramatically, much more cooling than an intercooler.

Bestchem Methanol as cooling agent in water injection system
Bestchem Methanol permits the use of very high compression ratios. Bestchem Methanol acts as a cooling agent and increases volumetric efficiency and is widely use in turbocharged/supercharged engines reducing charge temperature after compression.

Directions: Injection with water/methanol mixture of 50/50 ratio is recommended. This has been demonstrated to be the best for charge/air cooling, excellent detonation control, and controlling cylinder temperature. Except when severe cold climate which requires higher mixtures for freeze protection.

Caution: At high concentration and injection rates, methanol can act more like a fuel than a coolant. As you increase the portion of methanol injected, you are releasing more energy into the cylinder as the combined gasoline and methanol burn. You will increase the cylinder temperature rather than reducing it. Beyond 50/50 ratio, onset of detonation is more likely.

Packing: 20 Litres drum

Price: S$ 55.00 

 

Bestchem Methanol 50% Premix

Water injection, also known as anti-detonant injection, is spraying water/methanol mix into the incoming air or fuel-air mixture, or directly into the cylinder, in order to cool certain parts of the induction system where "hot points" could produce premature ignition. Methanol acts as a cooling agent, increases volumetric efficiency and lower the air intake temperature dramatically, much more cooling than an intercooler. It also permits the use of very high compression ratios.

Bestchem Methanol Pre-Mix is a blend of 50% deionized water and 50% methanol. Deionized water which is also known as demineralized water (DI water) is water that has had its minerals removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionised water in laymen terms means purified process water which has most of the dissolved solids removed. Deionized water should be used in the mixture to ensure the accumulation of scale and foreign matter is eliminated, which may contribute to the accumulation of scale and foreign matter in the water injection plumbing system.

Caution: At high concentration and injection rates, methanol can act more like a fuel than a coolant. As you increase the portion of methanol injected, you are releasing more energy into the cylinder as the combined gasoline and methanol burn. You will increase the cylinder temperature rather than reducing it. Beyond 50/50 ratio, onset of detonation is more likely.


Packing: 20 Litres Carboy

Price: S$ 45.00

 

Bestchem Methanol 70% Premix

Water injection, also known as anti-detonant injection, is spraying water/methanol mix into the incoming air or fuel-air mixture, or directly into the cylinder, in order to cool certain parts of the induction system where "hot points" could produce premature ignition. Methanol acts as a cooling agent, increases volumetric efficiency and lower the air intake temperature dramatically, much more cooling than an intercooler. It also permits the use of very high compression ratios.

Bestchem Methanol Pre-Mix is a blend of 30% deionized water and 70% methanol. Deionized water which is also known as demineralized water (DI water) is water that has had its minerals removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionised water in laymen terms means purified process water which has most of the dissolved solids removed. Deionized water should be used in the mixture to ensure the accumulation of scale and foreign matter is eliminated, which may contribute to the accumulation of scale and foreign matter in the water injection plumbing system.

Caution: At high concentration and injection rates, methanol can act more like a fuel than a coolant. As you increase the portion of methanol injected, you are releasing more energy into the cylinder as the combined gasoline and methanol burn. You will increase the cylinder temperature rather than reducing it. 


Packing: 20 Litres Carboy

Price: S$ 55.00

 

Manual Siphoning Pump

 

Suitable for gasoline, kerosene, diesel and race fuel.

NOTE: Use for liquids drummed in 20L tins only.

Price: S$ 5.00

 

Battery Operated Pump

 

Features & Applications

  • Suction type : Battery operated submersible motor type
  • Applicable liquids : Gasoline, kerosene, diesel, light oils, water & etc.
  • User-friendly ON/OFF switch
  • Suitable for Go-kart gasoline refilling, pesticide transfer application or aquarium water changing

Specifications

  • Delivery volume : About 10 Litres/Min (2.6 Gallons/Min)
  • Main material : P.P, P.E, Acetal
  • Power : DC 3V ("D" size battery X 2)
  • Pump up to about 4,000 Litres(1,056.7Gallons) with 2 "D" size batteries
  • Total length : 592mm(23.3")
  • Suction tube length : 385mm(15.2")
  • Discharge tube length : 605mm(23.8")
  • Net weight/pc : About 195g(6.88Oz)

NOTE: Use for liquids drummed in 20L tins only.

Batteries sold separately

Price: S$ 35.00 

 

Battery Operated Pump with Auto-Stop & Buzzer

 

Features & Applications

  • Suction type : Battery operated submersible motor type
  • Applicable liquids : Gasoline, kerosene, diesel, light oils, water & etc.
  • User-friendly ON/OFF switch
  • Auto Stop before overflowing by sensor
  • Auto Stop with acoustic signal
  • Suitable for Go-kart gasoline refilling, pesticide transfer application or aquarium water changing

Specifications

  • Delivery volume : About 9 Litres/Min (2.4 Gallons/Min)
  • Main material : P.P, P.E, Acetal, ABS
  • Power : DC 3V ("D" size battery X 2)
  • Pump up to about 4,000 Litres(1,056.7Gallons) with 2 "D" size batteries
  • Total Length : 592mm(23.3")
  • Suction tube length : 385mm(15.2")
  • Suction intake dia. : 32mm (1.26")
  • Head outer dia. : 40mm (1.57")
  • Discharge tube length : 560mm(22.0")
  • Discharge tube outer dia. : 19.5mm (0.77")
  • Net weight/pc : About 223g(7.87Oz)

NOTE: Use for liquids drummed in 20L tins only.

Batteries sold separately

Price: S$ 40.00

 

Battery Operated Pump with Nozzle Lever

 

Applications

Suction type: Battery Operated Pump (Submersible motor)

Applicable liquids: Gasoline, Diesel, DEF(AdBlue), Water, Kerosene, Antifreeze, Windshield washer fluid, Mild detergents, Agricultural chemicals, Light oils

User-friendly nozzle type

Specifications

  • Delivery volume: Approx. 9 litres per minute (2.4 Gallon per minute)
  • Main material: PP, PE, POM, NBR
  • Power: DC 3V ("D" size battery x 2)
  • Total length: 669 mm (26.3")
  • Suction tube length: 466 mm (18.3")
  • Suction intake dia.: 31 mm (1.22")
  • Discharge tube length: 1,000 mm (39.4")
  • Nozzle pipe outer dia.: 15.9 mm (0.63")
  • Net weight / pc: About 337g (11.89 oz)

Batteries sold separately

Price: S$ 48.00 

 

Size D Battery (For Battery Operated Pump)

Size D alkaline battery

(For Battery Operated Pump)

Comes in 2 piece per pack

Price: S$ 2.00